| Chilipepper Hot Water Pump
The Chilipepper is a small, powerful, micro-processor controlled pump that mounts under your sink. At the touch of a button your hot water is pumped rapidly to your sink or shower, without running any water down the drain! Inexpensive and easy to install.
Why buy the Chilipepper:
1). Get your hot water faster - less waiting!
2). Save thousands of gallons of water per year
3). Quick easy installation
4). Improves the performance of your dishwasher
5). Saves energy
6). Reduces sewage output...easier on septic systems
7). Reduces greenhouse gas emissions
8). Unconditional money back guarantee
9). No water gets run down the drain, saving you thousands of gallons of water per year!
Types: Standard- comes with just the pump.
Deluxe- comes with a Remote Receive and Transmitter Control (details below) No additional plumbing is required. It works with any kind of water heater including tankless and solar water heaters, gas or electric water heaters. In many cases your Chilipepper hot water pump will provide you with quick hot water at several or even all of the sinks and other fixtures in your home.
Remote control operation from any room is easy with the remote control option. The Chilipepper consumes less than $2.00 worth of electricity per year to operate. The unit works "on demand" only (when the switch is pushed).
This means you don't have to pay to heat water in a continuous loop for hours per day. Most other competitors units require this. Installation is quick and easy. No soldering required. End your slow hot water problems today!
Full 30 day money back guarantee! If for any reason you are not satisfied within the first 30 days, return your Chilipepper for a complete refund! No questions asked.
Remote Control Information for Deluxe model: The Chilipepper is the perfect home automation project.
Utilizing X-10 home automation's remote contral, it is a simple task to automate your home's hot water system. To activate the Chilipepper hot water appliance requires a momentary contact closure. By connecting the Chilipepper control cable to an X10 remote receiver you can control the delivery of hot water to your bathroom or kitchen fixtures with your home automation system.
Place a remote transmitter such as the MC460 next to your alarm clock. When you shut off your alarm in the morning touch the MC-460 remote and have hot water waiting for your shower by the time you get to the bathroom.
Chilipepper Technical Specifications: Motor:Universal Brush with ball. Rating: 1/3 input horsepower intermittent duty.115 Volts AC 60 Hz,Typical current draw: (load dependent) 2.5 amps,Current draw on and by: 0.007 amps.
Double Insulated, thermally protected and automatic reset.
Pump: Material: Glass filled Celcon GC-25,Centrifugal pump, Maximum working pressure:125 Psi. Maximum working temperature:140 degrees Fahrenheit. Internal spring loaded check valve .
Electronics: Maximum run time: approx. 3 minutes. Externally adjustable shut off sensitivity. Lockout when water temperature in pump is over 96 degrees.
Control voltage to button: 12 volts . Dimensions: Height: 7 1/2 inches Width: 4 1/8 inches Depth:3 1/2 inches
This item is very popular, due to the demand this item may be backordered at the time of purchase. |
Chilipepper 
